The use environment of CNC equipment In order to improve the service life of CNC equipment, aluminum cutting machines are generally required to avoid direct sunlight and other heat radiation, and avoid places that are too humid, have too much dust, or have corrosive gases.Precision CNC equipment should be kept away from equipment with large vibrations, such as punch machines, forging equipment, etc.

Good power supply guarantee In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, CNC equipment generally uses dedicated power lines (such as a separate line from a low-voltage power distribution room for use by CNC machine tools) or additional voltage stabilization devices, etc., can reduce the impact of power supply quality and electrical interference.

Develop effective operating procedures In terms of the use and management of CNC machine tools, a series of practical and effective operating procedures should be developed.For example, lubrication, maintenance, rational use and standardized shift system are the main contents of the use and management of CNC equipment.Developing and complying with operating procedures is one of the important measures to ensure the safe operation of CNC machine tools.Practice has proven that many failures can be reduced by complying with operating procedures.

CNC equipment should not be stored for a long time. CNC machine tools must be fully utilized after purchase, especially in the first year of use, so that weak links that are prone to failure are exposed as early as possible and can be eliminated during the warranty period.During processing, minimize the opening and closing of the CNC machine tool spindle to reduce wear on clutches, gears and other components.When there are no processing tasks, the CNC machine tool should also be powered on regularly, preferably 1 to 2 times a week, and run dry for about an hour each time, so as to use the heat generated by the machine tool itself to reduce the humidity inside the machine and prevent the electronic components from getting damp. , and at the same time, it can also detect in time whether there is a low battery alarm to prevent the loss of system setting parameters.